Free shipping everywhere · Instant PDF download · 90-day money-back guarantee
Art de La Rénovation

Where Can You Find Spare Parts for a Classic Corvette C2? The Complete Guide

Where to find spare parts for a classic Corvette C2: US specialists, NCRS, swap meets and clubs. Prices and tips for your restoration.

Complete restoration manualEvery step, the technical values and the pro tips.
See the guide →

Spare parts for a classic Corvette C2 (1963-1967) come from four main channels: specialists in the United States with an extensive reproduction catalogue (common items from 10 EUR for a seal kit up to 650 EUR for a reproduction fibreglass panel), breakers and donor cars, American swap meets, and the National Corvette Restorers Society (NCRS) along with other owner communities. The model's strong collector following and five years of production across three distinct V8 families have kept the aftermarket well supplied. The one real complication for a French owner is geography: most specialist suppliers are based in the United States, which adds shipping cost and customs formalities to the equation.

Reproduction parts specialists in the United States: the first place to look

The Corvette C2's enduring popularity among American collectors has kept a dedicated reproduction market thriving for decades, covering the small block 327 as well as the 396 and 427 big blocks introduced later in the model's run.

The names that matter

  • Corvette Central (United States): a long established supplier specialising exclusively in Corvette parts, with strong coverage of the 1963-1967 range for mechanical, bodywork and interior references.
  • Zip Corvette Parts (United States): one of the largest dedicated Corvette parts retailers, with a catalogue covering every generation including the C2.
  • Paragon Corvette Reproductions (United States): a parts manufacturer rather than a retailer, its reproduction panels and trim are distributed through most of the specialists above and are widely treated as a reference for correct fit and finish.
  • Eckler's Corvette Parts (United States): a long running specialist, particularly strong on fibreglass body panels and interior trim.
  • European classic car parts distributors: a handful carry common Corvette consumables such as gaskets and fasteners, useful for avoiding a transatlantic wait on basic items.

Easy to find new

Thanks to the scale of the aftermarket, most common items remain available new: engine gasket sets for the 327 small block or the 396 and 427 big blocks (12 to 40 EUR), disc brake pads and calipers fitted from 1965 onward or drum brake components for the earlier 1963-1964 cars (35 to 110 EUR), Carter four-barrel carburettor rebuild kits matched to the correct engine (18 to 45 EUR), ignition parts, fan belts and filters. On the bodywork side, fibreglass panel sections, birdcage repair sections and the frame crossmembers underneath them are all reproduced, typically 90 to 650 EUR depending on the part.

What is becoming harder to find

Trim and glass specific to the 1963 Split Window coupe, built for a single model year, are considerably scarcer than parts for the 1964-1967 cars. The same goes for components tied to the Rochester mechanical fuel injection option, offered only on the 327 small block through 1965, and for anything specific to the rare L88 competition option fitted in 1967. Original documentation and badging for these configurations command a real premium over the more common carburetted small block cars.

Need a detailed technical manual for your restoration? Find the full step by step procedures for the Corvette C2, with correctly referenced parts lists, engine identification charts and factory torque settings. Discover the Corvette C2 restoration guide →

Breakers and donor cars: a different story on a fibreglass car

Because the body is fibreglass rather than steel, specialist breakers hold far less C2 body sheet metal than they would for a steel-bodied classic. What they do carry, pulled from accident-damaged or non-restorable donor cars, is just as valuable: steel birdcage sections, frames, V8 engines and gearboxes, interior trim and glass.

Where to look

  • US salvage specialists: breakers who focus on classic Corvettes hold stocks of birdcage and frame sections pulled from non-restorable C2s.
  • Hemmings Motor News (United States): a long running classified source for classic American vehicle parts, with Corvette specific listings.
  • eBay.com and eBay.fr: a practical way to source both US frame or birdcage sections and smaller items without a dedicated import trip, though shipping and customs costs from the US need to be factored into any bid.
  • French classified platforms such as Le Bon Coin: occasional parts lots from the C2s privately imported into Europe.

Typical secondhand prices

Part Typical secondhand price
Complete disc brake assembly, per wheel (1965-1967 cars) 90 to 220 EUR
Used V8 327 small block engine, running condition 900 to 2,200 EUR
Used V8 396 or 427 big block engine, running condition 1,500 to 3,500 EUR
Fibreglass door in sound condition 280 to 550 EUR
Used manual gearbox, running condition 450 to 1,000 EUR

A big block 396 or 427 commands a premium over the small block 327, and a documented Rochester-injected 1963-1965 car or a 1967 L88 pushes prices considerably higher still, given how few of these configurations were built.

Swap meets and shows: the US advantage

Swap meets remain the best source for rare birdcage and frame sections, NOS items (New Old Stock, meaning original parts never fitted) and period trim. Because the Corvette C2 is an American vehicle, the richest swap meets are found in the United States, where owners and vendors trade parts directly.

Where to look

  • Corvettes at Carlisle (Pennsylvania, United States): the largest Corvette-specific show and swap meet in the world, with a parts marketplace covering every generation including the C2.
  • National Corvette Restorers Society (NCRS) regional and national meetings: the reference club for the model worldwide, bringing together specialist vendors alongside its judging and authentication activities.
  • Retromobile (Paris, France): the largest classic vehicle show in France, where American specialists occasionally exhibit alongside European marques.
  • Techno Classica (Essen, Germany): Europe's largest classic vehicle show, with occasional US classic specialists among its exhibitors.

Tips for sourcing from the United States

If you plan to buy parts directly from a US supplier, group several items into one order to spread the fixed cost of shipping and customs clearance. Always confirm the exact engine fitted to your car, 327 small block, 396 big block or 427 big block, and whether it carries the Rochester fuel injection, before ordering ignition, fuel system or cylinder head parts, since these configurations do not share every mechanical component.

Forums and owner communities

Before shopping for parts, it is worth consulting our complete Corvette C2 restoration guide to confirm which engine and model year your car carries, since the 1963 Split Window, the 1964 coupe and the 1965-1967 cars do not all take the same trim or glass.

  • English language forums dedicated to the 1963-1967 Corvette: active communities useful for identifying exact references and year to year differences.
  • Facebook groups dedicated to classic Corvette owners: fast responses, useful for urgent requests or for finding a part held by a fellow enthusiast.
  • French and European Corvette clubs: fewer members for this specific model than in the United States, but a useful point of contact for import advice and shared shipping.

Parts worth buying ahead of time

  • Birdcage and frame repair sections: central to most restorations, since this inner steel structure and the frame beneath it are the only parts of the car genuinely exposed to corrosion, and the ones most likely to see lead times grow as reproduction tooling ages.
  • Carter four-barrel carburettor rebuild kits matched to the correct engine: the 327, 396 and 427 do not all share the same carburettor and manifold references. Buying the wrong kit is a common and costly mistake.
  • Rochester injection seals and components, where fitted: worth having in stock given how scarce this 1963-1965 option is, rather than ordering mid project.
  • Windshield frame and soft top seals: inexpensive on their own, but a failed seal here is what lets water reach the birdcage underneath, so replacing them early is cheap insurance.

Ready to get started? Our Corvette C2 restoration manual details every operation with part references, the tools required and the points to watch, from the birdcage to the carburettor. Discover the Corvette C2 restoration guide →

Frequently asked questions

Can you still find fibreglass body panels for a 1963-1967 Corvette C2?

Yes. Thanks to the model's enduring collector following and decades of restoration demand, reproduction fibreglass panels remain available from US specialists such as Corvette Central or Zip Corvette Parts. Importing from the United States adds shipping cost and customs formalities, which should be factored into any restoration budget.

Is it cheaper to buy parts in the United States or in Europe?

For Corvette specific body, birdcage and frame parts, the United States is almost always the better source, since the specialist market is concentrated there. For common consumables such as gaskets, filters and fasteners, a French or European classic parts distributor often works out cheaper once shipping and customs are included.

Do the 327, 396 and 427 Corvette C2 engines share the same parts?

Not entirely. The 327 small block and the 396 and 427 big blocks use different carburettor and manifold references, and only the 327 could be ordered with the Rochester mechanical fuel injection, offered through 1965. Always confirm which engine is fitted before ordering ignition, fuel system or cylinder head parts.

What budget should I plan for parts on a full Corvette C2 restoration?

A full parts budget for a complete restoration, covering mechanical, bodywork and interior, commonly ranges from 4,500 to 13,000 EUR, depending on the vehicle's starting condition and whether reproduction or original parts are used. A mechanical only rebuild, covering the engine, brakes, steering and electrics, typically falls between 2,000 and 4,500 EUR.

Are any Corvette C2 parts genuinely impossible to find today?

A handful, yes. Trim and glass specific to the one-year-only 1963 Split Window coupe, components for the Rochester fuel injection option offered only through 1965, and parts or documentation tied to the rare 1967 L88 competition option are very scarce. For these, restoring the original part is usually more realistic than hunting for an identical replacement.

Want to go further?

Our guides cover every step, with precise technical values, photos and expert advice.

Discover our manuals